Shop
Bituman waterproofing price in Pakistan
Bitumen waterproofing is one of the most popular methods because it is very durable and cheap. This comprises of self-adhesive or torch-applied bituminous membranes for waterproofing. Which is perfect for forming a watertight seal as it holds very well on flat and low-sloped roofs. Costs for bitumen in Pakistan may range depending on amount and quality but usually it is still cheaper than many other options.
Dpc Roll Waterproofing in Pakistan
Heat Proofing Price in Pakistan(Master Heat shield)
Membrane Sheets Price in Pakistan
Metal Shed Roof Waterproofing in Pakistan
Polyurethane injection chemical price in Pakistan
Polyurethane injection chemical price in Pakistan
MASTER PU INJECTION RS 2500
Waterproofing: Waterproof as the name suggests is water-tight construction, connection, and maintenance which makes it an important factor in building or maintaining structures of a home with constant contact with moisture. Polyurethane injection chemical price in Pakistan This is an old method in the Philippines, it gets injected directly into your wall and goes along with various methods for waterproofing internal walls.
Polyurethane Liquid Rubber Waterproofing Price(MASTER Polyurethane)
Polyurethane Liquid Rubber Waterproofing Price(MASTER Polyurethane)
Moisture-Cure Polyurethane Liquid Waterproofing & Heat ProofingDESCRIPTION
MASTER POLYURETHANE PU is a cold-applied single-component moisture cure aliphatic polyurethane waterproofing and heat-proofing protective sealing liquid membrane.Uses
MASTER POLYURETHANE PU is suitable for fixing:- Concrete
- Masonry & Metal Surfaces
- Basement, Bed & Retaining Walls
- Wet Areas
- GRP & GRC
- Concrete Walls
Advantages/Polyurethane Liquid Rubber Waterproofing Price(MASTER Polyurethane)
- Highly Elastic
- High Tensile Strength
- Crack Bridging
- Rubber-Like Membrane
- Resistant to Oxidation
- UV Resistant
- Highly Durable
- Repair Friendly
MATERIAL DATA
- Type: Polyurethane
- Form: White, Black, Grey
- Packing: 20 Kg or as per requirement
- Storage Condition: 12 months in unopened packaging, between 5°C and 35°C
TECHNICAL DATA
| Property | Value | Test Method |
| Specific Gravity | 1.1 ± 0.05 | ASTM D1475 |
| Tensile Strength | >8 N | ASTM D412 |
| Tear Resistance | >15 N | ASTM D624 |
| Shore Hardness A | 70 | ASTM D2240 |
| Elongation at Break | >600 | ASTM D412 |
| QUV Accelerated Weathering Test | Passed 2000 hours | ASTM G53 |
| SRI (Solar Reflectance Index) | 101 | ASTM E1980 |
| Resistance to Bacteria | No Attack | ASTM D4299 |
| Resistance to Algae | No Attack | ASTM G29 |
| Service Temperature | 30 to 80°C |
- Surface Cleaning
- Apply Primer – Use Master Polyurethane PU PRIMER to smoothen the surface and block pores.
- Apply Top Coat – Apply Master Polyurethane PU Coating for complete surface protection.
- Touch Dry: 2-4 hours
- Partial Curing & Water Test: 12-24 hours
- Complete Curing: 48 hours
- Master Polyurethane PU Coating: Approx. 700 square feet per bucket (20 KG)
- Master Polyurethane PU Primer: Approx. 1200 square feet per bucket (20 KG)
- Do not breathe dust, fumes, gas, mist, vapors, or spray.
- Wear protective gloves, protective clothing, eye protection, and face protection.
- In case of inadequate ventilation, wear respiratory protection.
- If on the skin, wash with plenty of soap and water.
- If inhaled, remove the victim to fresh air and keep them in a comfortable position.
SBR Latex Chemical Price in Pakistan
Thermocol Sheets Price in Pakistan
Water Stopper Price in lahore islamabad Pakistan
Waterproofing Chemical Price in Pakistan
Among the many methods for preventing water ingress during construction, cementitious
waterproofing is one of the most common and effective solutions. It is the process of using
cement-based products to protect a workforce from being ruined by water, preserving them for
months and years. So here is the ultimate guide to cementitious waterproofing,